Replacement USB humidifier
Replacement Part for the Incubator Pro
- Increases air humidity levels up to 95% RLH
The Replacement USB humidifier is a replacement part for the Exo Terra Precision Incubator PRO with humidity control. Connect the USB plug of the Replacement USB humidifier to the USB port located at the back of the LED display next to the power cable of the Exo Terra Precision Incubator PRO. To prime the Replacement USB humidifier, pour a bit of water in the middle of the device, then turn it upside-down and lightly shake to remove excess water. Then place the humidifier flat on the water so it will float and starts humidifying.
Instructions
1. Connect the USB plug of the Replacement USB humidifier to the USB port located at the back of the LED display next to the power cable of the Exo Terra Precision Incubator PRO (PT2444).
2. Place the Replacement USB humidifier in the opening in the middle of the foam insert.
3. To prime the Replacement USB humidifier, pour a bit of water in the middle of the device, then turn it upside-down and lightly shake to remove excess water. Then place the humidifier flat on the water so it will float and starts humidifying.
IMPORTANT Keep the tray of the Precision Incubator PRO filled with water throughout the entire incubation period!
IMPORTANT The use of demineralized (reverse osmosis) water or purified water will prolong the life of the USB humidifier.
The lifespan of the Replacement USB humidifier is approx. 800 working hours. Reducing the humidity setting to 70-75% will reduce the working hours of the humidifying membrane resulting in an increased lifespan of the Replacement USB humidifier.